Electricity from water
PowerPal Product Line


PowerPal T1 and T2 Turgo
Models MGH-T1 and MHG-T2
Power outputs: 660w up to 4kW
(only available in 220v and 50hz)


The PowerPal T1 and T2 Turgo Series is another simple system consisting of a turbine with generator attached. Generator power output is from 660W to 2.0kW depending on head and flow.

The T1 has twin nozzles and is fitted with a 1kW capacity generator as pictured above. All or part of the stream flow is diverted through a 12cm diameter steel penstock pipe and down to the turbine. Output voltage and frequency are controlled by our electronic load controller (with ballast).

PowerPal T1 and T2 Turgo

MGH-T1
Water head H 8m
9m
10m
11m
Water flow
21
l /sec
22
l /sec

23
l /sec

24
l /sec

Turbine Output
880W
1.04kW
1.2kW
1.33kW
Gen. Output
660W
780W
900W
1.00W


The T2 is a single nozzle turgo turbine fitted with a 2, 3, or 4kW capacity generator and comes in five quite distinct models
  • (1) a T2/ 1.5kW model
  • (2) a T2/ 2kW model for medium head sites,
  • (3) another T2/2kW High Head model for higher head sites
  • (4) A T2/3kW model for sites with similar heads but higher flow rates
  • (5) A T2/4kW model for sites with similar heads but even higher flow rates

    The detailed head and flow rate combinations and the electrical power output that these various combinations generate are given on the Data Sheet T1 - T5 Series that has a link on the Home page

  • PowerPal resources for mini hydro electric generators
    Click to see our product in use
    Download Operations Manual T1

    Download Operations Manual T2

    Property of Asian Phoenix Resources Ltd, and its PowerPal Micro-Hydro Products
    All rights reserved, not to be reproduced whole or in part without expressed written consent .